Reprocessing your room scans as LiDAR allows users to access both types of processing from a single scan. This method is especially useful when you need both an initial overview and detailed information about the room, eliminating the need to scan the area twice.
Please note that this feature is only available for room captures that were created on your own device. Room captures that were shared with you or downloaded from the Explore page cannot be reprocessed as LiDAR.
Reprocessing Room Captures
1. Navigate to Your Room Capture: Log into your Polycam account and access the Library. Select the room capture you want to reprocess.
2. Tap the Process Button: Locate and tap the Process button on the far left side of the navigation bar.
3. Select the Black Process Button: Click the black Process button to begin reprocessing. This will convert the Room Mode capture to LiDAR mode.
4. Toggle Between Room and LiDAR Modes: Once the reprocessing is complete, you can toggle between Room and LiDAR modes by tapping the eye icon in the Process section to compare the versions.